Shopping Cart (
R-6 - Invisiware Receiver
The Tensioners That Are Hidden Inside The Post - Invisiware® Receiver with Invisiware® Stud Concealed, swaged, tensioning, through-the-post-mounted fitting suitable for level and pitched runs. Receivers and studs are available for 1/8˝, 3/16˝, 1/4˝, 5/16˝, and 3/8˝ diameter 1x19 stainless steel cable. • The Invisiware® Receiver with Invisiware® Stud can be used with any other fitting on the opposite end of the run. • Fitting is placed and concealed within a pre-drilled hole in the metal end post. • Receiver is furnished with a Delrin® washer that is installed between the shoulder of the fitting and the end post to protect the surface of the finish of the end post as tension is applied. • Stud is swaged onto one end of the cable and threaded into the Receiver installed in the end post. Tension is created by rotating the Receiver (with a hex wrench inserted into its broached end) and drawing the stud into the Receiver. - For R-6-XX Tools needed: 29/64" drill bit
1
| Cable | Material/Finish | Length | SKU | Description | Price | Qty | Unit | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 1/4" [R-8-52] R-6 - Invisiware Receiver (1/4", Satin Stainless Steel 316, 3.03") |
Satin Stainless Steel 316 | 3.03" | R-8-52 Ships within 24-48 hours, Local pickup available |
[R-8-52] R-6 - Invisiware Receiver (1/4", Satin Stainless Steel 316, 3.03")
Spec Sheet
|
$ 26.02 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8" | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 3/8" [R-12-32] R-6 - Invisiware Receiver (3/8", Satin Stainless Steel 316, 2.03") |
Satin Stainless Steel 316 | 2.03" | R-12-32 Ships within 24-48 hours, Local pickup available |
[R-12-32] R-6 - Invisiware Receiver (3/8", Satin Stainless Steel 316, 2.03")
Spec Sheet
|
$ 17.69 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Tensioners That Are Hidden Inside The Post - Invisiware® Receiver with Invisiware® Stud
Concealed, swaged, tensioning, through-the-post-mounted fitting suitable for level and pitched runs. Receivers and studs are available for 1/8˝, 3/16˝, 1/4˝, 5/16˝, and 3/8˝ diameter 1x19 stainless steel cable.
• The Invisiware® Receiver with Invisiware® Stud can be used with any other fitting on the opposite end of the run.
• Fitting is placed and concealed within a pre-drilled hole in the metal end post.
• Receiver is furnished with a Delrin® washer that is installed between the shoulder of the fitting and the end post to protect the surface of the finish of the end post as tension is applied.
• Stud is swaged onto one end of the cable and threaded into the Receiver installed in the end post. Tension is created by rotating the Receiver (with a hex wrench inserted into its broached end) and drawing the stud into the Receiver.
- For R-6-XX Tools needed: 29/64" drill bit